EasyManua.ls Logo

Kia XCEED PHEV MY21 - Page 234

Kia XCEED PHEV MY21
636 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features of your vehicle
1025
Forward/Reverse Parking Distance Warning
(PDW)
There is a possibility of Forward/
Reverse Parking Distance Warning
malfunction when:
Driving on uneven road surfaces
such as unpaved roads, gravel,
bumps, or gradient.
Objects generating excessive
noise such as vehicle horns, loud
motorcycle engines, or truck air
brakes can interfere with the
sensor.
Heavy rain or water spray is pres
-
ent.
Wireless transmitters or mobile
phones present near the sensor.
The sensor is covered with snow.
Any non-factory equipment or
accessories have been installed,
or if the vehicle bumper height or
sensor installation has been mod
-
ified.
Detecting range may decrease
when:
Outside air temperature is
extremely hot or cold.
The following objects may not be
recognized by the sensor:
Sharp or slim objects such as
ropes, chains or small poles.
Objects, which tend to absorb
sensor frequency such as clothes,
spongy material or snow.
Undetectable objects smaller than
100 cm (40 in) and narrower than
14 cm (5.5 in) in diameter.
Forward/Reverse Parking Distance
Warning system precautions
Forward/Reverse Parking Dis
-
tance Warning system may not
sound consistently depending on
the speed and shapes of the
objects detected.
Forward/Reverse Parking Dis
-
tance Warning system may mal
-
function if the vehicle bumper
height or sensor installation has
been modified. Any non-factory
installed equipment or accesso
-
ries may also interfere with the
sensor performance.
Sensor may not recognize objects
less than 30 cm (12 in) from the
sensor, or it may sense an incor
-
rect distance. Use with caution.
When the sensor is frozen or
stained with snow, dirt, or water,
the sensor may be inoperative
until the stains are removed using
a soft cloth.
Do not push, scratch or strike the
sensor. Sensor damage could
occur.
Do not spray the sensors or its
surrounding area directly with a
high pressure washer. Shock
applied from high pressure water
may cause the device to not
operate normally.
CD_PHEV_LHD_features_driving.book Page 102 Thursday, November 14, 2019 10:22 PM

Table of Contents