Features of your vehicle
1625
Interior features
Temperature control (Manual)
䳜 Each time you press the switch,
the temperature setting of the
seat will change as follows:
-Front seat
- Rear seat
䳜 The seat warmer defaults to the
OFF position whenever the
ENGINE START/STOP button is
turned on.
Temperature control (Automatic)
The seat warmer starts to auto
-
matically control the seat tempera
-
ture in order to prevent low-
temperature burns after being
manually turned ON.
You may manually press the button
to increase the seat temperature.
However, it soon returns to the
automatic mode again.
䳜 When pressing the switch for
more than 1.5 seconds with the
seat warmer operating, the seat
warmer will turn OFF.
䳜 The seat warmer defaults to the
OFF position whenever the
ENGINE START/STOP button is in
the ON position.
With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automati
-
cally depending on the seat tem
-
perature.
䳜 When cleaning the seats, do not
use an organic solvent such as
paint thinner, benzene, alcohol
and gasoline. Doing so may dam
-
age the surface of the heater or
seats.
䳜 To prevent overheating the seat
warmer, do not place anything on
the seats that insulates against
heat, such as blankets, cushions
or seat covers while the seat
warmer is in operation.
䳜 Do not place heavy or sharp
objects on seats equipped with
seat warmers. Damage to the
seat warming components could
occur.
䳜 Do not change the seat cover. It
may damage the seat warmer or
airventilation system.
CD_PHEV_LHD_features_driving.book Page 162 Thursday, November 14, 2019 10:22 PM
To Next Page