Kia XCEED PHEV MY21 - Starting the Plug-in Hybrid Vehicle (Smart Key); Starting the Hybrid System

27
1
1
Hybrid System Overview Driving the plug-in hybrid vehicle
Charging stopped. Check the AC
charger
This messages is displayed when
the charging failed by external char
-
ger error.
The purpose of this message is to
let you know the error has occurred
in the charger itself, not in the vehi
-
cle.
Charging stopped. Check the cable
connection
This messages is displayed when
charging is stopped because the
charging connector is not correctly
connected to the charging inlet. If
this occur, separate the charging
connector and re-connect it and
check whether there is any problem
(external damage, foreign sub
-
stances, etc.) with the charging con -
nector and charging inlet. If the
same problem occurs when charging
the vehicle with a replaced charging
cable or genuine Kia portable char
-
ger, have the vehicle inspected by a
professional workshop. Kia recom
-
mends to visit an authorized Kia
dealer/service partner.
Low/High System Temp. Maintain -
ing Hybrid mode
This message is displayed when the
temperature of the high-voltage
(hybrid) battery is too low or too
high.
This warning message is to protect
the battery and the hybrid system.
Low/High System Temp. Switching
to Hybrid mode
This message is displayed when the
temperature of the high-voltage
(hybrid) battery is too low or high.
This warning message is to protect
the battery and the hybrid system.
Switching to Hybrid mode to allow
heating
䳜 When the coolant temperature is
lower than -14 󳚛C (57 󳚛F), and you
turn the climate control On for
heating, the above message will
be displayed in the cluster. Then,
the vehicle will automatically
switch to HEV mode.
䳜 When the coolant temperature is
higher than -14 󳚛C (57 󳚛F), or you
turn the climate control Off, the
vehicle will automatically return
to EV mode.
CD_PHEV_LHD.book Page 27 Tuesday, November 12, 2019 11:29 PM