21
6
6
Driving your vehicle Dual Clutch Transmission (DCT)
Do not drive with the shift lever in N
(Neutral).
The engine brake will not work and
lead to an accident.
Parking in N (Neutral) gear
Follow below steps when parking
and you want the vehicle to move
when pushed.
1. After parking your vehicle, step on
the brake pedal and move the
shift lever to [P] with the ignition
button in [ON] or while the engine
is running.
2. If the parking brake is applied
unlock the parking brake.
䳜 For EPB (Electronic Parking
Brake) equipped vehicles, push
the brake pedal with the igni
-
tion button in [ON] or while the
engine is running to disengage
the parking brake. If [AUTO
HOLD] function is used while
driving (If [AUTO HOLD] indica
-
tor is on in the cluster), press
[AUTO HOLD] switch and [AUTO
HOLD] function should be turn
off.
3. While pressing the brake pedal,
turn the ENGINE START/STOP
button [OFF].
䳜 For smart key equipped vehi
-
cles, the ENGINE START/STOP
button can be moved to [OFF]
only when the shift lever is in
[P].
4. Change the gear shift lever to [N]
(Neutral) while pressing the brake
pedal and pushing [SHIFT LOCK
RELEASE] button or inserting,
pressing down a tool (e.g. flat
-
head screw-driver) into the
[SHIFT LOCK RELEASE] access
hole at the same time. Then, the
vehicle will move when external
force is applied.
䳜 With the exception of parking in
neutral gear, always park the
vehicle in [P] (Park) for safety and
engage the parking brake.
䳜 Before parking in [N] (Neutral)
gear, first make sure the parking
ground is level and flat. Do not
park in [N] gear on any slopes or
gradients.
If parked and left in [N], the vehi
-
cle may move and cause serious
damage and injury.
䳜 After the ENGINE START/STOP
button has been turned off, the
electronic parking brake cannot
be disengaged.
Driving_your_vehicle.fm Page 21 Thursday, November 14, 2019 10:42 PM