Kichler Lighting FERRON - Operating Instructions (Airflow)

Fig. 27
Fig. 28
NOTE: Please remember your control system is an RF (Radio
Frequency) control system. You may occasionally experience
control problems because of other radio frequency interference, i.e.
fan turns o, light turns o or won't turn on, speed changes, etc. If
this should happen, just change the “Control Frequency” by turning
the power o and repeating steps 1 through 6 under System
Programming.
Speed settings for warm or cool weather depend on factors such as
the room size. Ceiling height, number of fans and so on.
Warm weather - Forward (counter clockwise) A downward airflow
creates a cooling eect as shown in Fig. 27. This allows you to set
your air conditioner on a warmer setting without aecting your
comfort.
Cool weather - Reverse (clockwise) An upward airflow moves warm
air o the ceiling area as shown in Fig. 28. This allows you to set your
heating unit on a cooler setting without aecting your comfort.
OPERATING INSTRUCTIONS
60" FERRON
TM
| 19