IMPORTANT
Thank you for purchasing a Klock Werks®
Fit
Kit equipped with industry leading
KICKER®
speakers and amplifier.
There are
two
models of amplifier that may be used
in
this
kit:
PX1
00.2
or
PXA200.2.
Set the switches to the following
configuration for the
PX1 00.2
IMPORTANT:
Turn
the gain
all
the way down,
then increase to 20%,
about
1/4
turn from
0.
Product ships with gain at maximum setting.
Set the switches to the following
configuration for the
PXA200.2
Your gain rotary
should look like
this.
Be
careful
not
to set it
to
80%
instead!
GAIN
All
other installation procedures, including wiring and mounting, are the same for either
amplifier.
Enjoy your Performance PowerSports equipment as engineered by Klock
Werks and
KICKER!
KVVSS-082415-C
To Next Page
Loading...
Need help?
General
