To Next PageTo Next Page
Need help?Do you have a question about the Kicker PXA300.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | > 95 dB |
| Input Sensitivity | 200 mV - 4 V |
| Crossover | Variable |
Core power output ratings and frequency response range of the amplifier.
Adjusting signal input levels and internal crossover frequency settings.
Amplifier's physical size and other key technical details.
Instructions for physically installing and connecting the amplifier.
Guidance on installing the external fuse and making power connections.
Diagram showing speaker connections for mono bridged mode operation.
Explanation of +12V and DC Offset automatic turn-on options.
How to set input signal type and use the fader control.
Adjusting the high-pass crossover frequency for audio output.
Procedure for properly setting the amplifier's input gain.
Diagnosing issues when the amplifier has no sound output.
Understanding protection LED behavior and related causes.
Addressing issues like low output, noise, and distorted sound.
Details on what the electronics limited warranty covers and excludes.
Steps to follow for warranty or service requests.
Information on obtaining country-specific warranty procedures.
