To Next PageTo Next Page
Need help?Do you have a question about the Kicker PXA200.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Rated Power (RMS) @ 4 Ohms | 50W x 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >90dB |
| Input Sensitivity | 200 mV - 4 V |
| Bridged Power (RMS) @ 4 Ohms | 200 Watts |
Recommended switch configurations for different Kicker amplifier models.
Instructions for setting the amplifier's input gain to prevent distortion.
Proper procedures for securely mounting the amplifier unit.
Connecting the amplifier's wiring harness to the vehicle system.
How to set the amplifier to turn on via +12V or DC Offset.
Adjusting input sensitivity and crossover frequency for optimal sound.
Correctly adjusting the gain for optimal audio signal matching.
Troubleshooting no audio output, blue LED status, and protection modes.
Addressing issues like distortion, noise, and reduced bass response.
How to obtain warranty service and return defective merchandise.
Conditions and damages not covered by the Kicker warranty.
Expected service time for Kicker electronics product returns.
Steps to prepare Kicker speakers and install them in the factory location.
How to obtain warranty service and return defective merchandise.
Conditions and damages not covered by the Kicker warranty.
Expected service time for Kicker acoustic product returns.
Procedures for returning defective Kicker products for service.
Specific items and damages excluded from Kicker's warranty coverage.
Information regarding the expected service duration for warranty claims.
