5
2. Other Alarm Visual And Audible Indicators
Operational Mode Visual Indications Audible Indications Action/Note
Normal (standby) Green LED blink approx
every 60 sec.
Test (button press
when no alarm
condition is present)
(Note: Test is very
loud, stand a few feet
away.)
Red LED blinks in time
with alarm pattern.
• Single beep.
• 3 long beeps, voice "Fire!",
3 long beeps.
Perform button press
once a week to verify
proper alarm operation.
Smoke Alarm
Memory (unit has
experienced a smoke
alarm event)
Red LED blink every 16
sec.
After button push,
voice “Smoke previously
detected.”
NOTE: Alarm memory
is only retained for 24
hrs. Push button to clear
Alarm Memory.
Smoke Alarm Hush
Mode (SMART HUSH®
CONTROL)
Red LED blinks every
2 sec.
After button push, voice
“Hush Mode Activated."
Smoke alarm pattern stops.
(If there is too much smoke
to allow Hush: voice “Too
Much Smoke cannot be
Hushed.” Smoke alarm
pattern continues.)
This feature is to be used
only when a known alarm
condition, such as smoke
from cooking, activates
the alarm.
To Next Page
Loading...
