Kinco FV20-4T-0037G/0055L User Manual

72
72
Phenomena
Conditions
Possible reasons of fault
Actions
“P.oFF”
is reported
when the
drive begin
to run
immediately
after
power-on.
Transistor or
contactor
disconnected and
overload
Since the transistor or contactor
is disconnected, the bus voltage
drops at heavy load, therefore,
the drive displays P.Off, not
E018 message
Run the drive until the transistor or
contactor is connected.

Kinco FV20-4T-0037G/0055L Specifications

General

Power	3.7kW/5.5kW
Control Mode	V/F control
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-20°C to +60°C
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit