Need help?Do you have a question about the Kinco FV100 Series and is the answer not in the manual?
General| Power | 240W |
|---|---|
| Output Voltage | 0 to DC 24V |
| Output Current | 10A |
| Protection Features | Overcurrent protection, Overvoltage protection |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | 0.5kg |
Critical safety warnings, precautions, and attention points for operating the VFD.
Details found on the VFD's nameplate.
Explanation of the VFD model designation system.
Diagrams and table showing physical dimensions and weight of VFD models.
Guidelines for VFD installation location and required spacing for ventilation.
Configuration and terminal types for the VFD's main circuit.
Instructions and terminal functions for connecting the VFD's control circuit.
Guide to operating the VFD using its control panel interface.
Explanation of LEDs, indicators, and display states on the operation panel.
Examples of panel operations and parameter settings.
Comprehensive list of VFD faults, error codes, and suggested corrective actions.
Explanation of how parameters are organized and structured in the manual.
Core parameters for basic VFD operation and configuration.
Parameters controlling the VFD's start-up and shutdown sequences.
Parameters for setting and adjusting the VFD's operating frequency.
Parameters for defining V/F curves and operational characteristics.
Parameters that define the VFD's acceleration and deceleration profiles.
Key parameters for controlling VFD performance and behavior.
Parameters related to configuring digital and analog I/O terminals.
Parameters for configuring the Pulse Generator (PG) module.
Parameters for managing and configuring fault behavior and protection.
Parameters that define the characteristics of the connected motor.
Parameters specific to V/F control mode.
Advanced operating parameters.
Parameters for configuring VFD communication settings.
Parameters related to keyboard operation and panel locking.
Parameters for multi-stage frequency control.
Parameters for implementing PID control loops.
Parameters for the integrated Simple PLC functionality.
Reserved parameter group.
Parameters that display the VFD's current operational status.
Records of past faults and their details.
Parameters identifying the specific product model and version.
Factory-set parameters, typically requiring password access.
To Next Page
