Kinco HP043 User Manual

Kinco-HP
User Manual
25
3.1.2 Edit configuration .
Reference Kinco HMIware manual.
3.1.3 download link for HMI manual
https://en.kinco.cn/Download/D_enUserManual/HMI/Kinco%20DTools%20User%20Manual.
pdf
3.2 PLC
3.2.1 introduction
Kinco HMI-PLC use Kincobuilder programming software and same instructions, same as K5.
HMI-PLC improve some functions, pls reference the manual.
Pls reference Kincobuilder software 【Help】or download K5/K2 software for most functions.
https://en.kinco.cn/Download/D_enUserManual/PLC/Software%20manualfor%20K5_2019051
6.zip
3.2.2 Install driver of USB programming port
HMI-PLC provides USB programming port. This programming port will be used as virtual
serial port in PC. Its driver files are located in \drivers in Kincobuilder installation folder. Right
now it supports Windows XP 、 Windows 7 和 Windows 8 systems, as shown in following

Kinco HP043 Specifications

General

Brand	Kinco
Model	HP043
Category	Control Unit
Language	English