27
that provides a subtle electronic click each time a key press is registered. The purpose of the key click is to provide
feedback to the user regarding when a given key press has been registered by the computer to discourage “bottoming
out” on the keys, which if done repeatedly can cause nger pain.
8. Tone Status— Indicates whether special feedback “tones” are enabled. The Advantage2 provides a feedback tone to
alert the user when they “toggle” the keyboard into a special mode: Keypad, Num Lock, Caps Lock and Scroll Lock.
9. Number of Stored Macros— Indicates how many custom macros have been programmed and assigned to the
active layout.
10. Number of Stored Remaps— Indicates how many custom key remaps have been assigned to the active layout.
Note: The Remap count is affected by the Thumb Key Mode. Windows Mode is set as the default so it reports 0 remaps.
Mac Mode has 8 remapped keys relative to Windows Mode and PC Mode has 2 remapped keys relative to Windows
Mode.
Activate QWERTY Layout Program + F3
Loads the QWERTY.txt conguration le which corresponds to the default QWERTY Layout (see page XX) plus any key
remaps and or macros that you have previously saved to this layout.
Note: No change to Thumb Key Mode or other settings.
Activate Dvorak Layout Program + F4
Loads the Dvorak.txt conguration le which corresponds to the default Dvorak Layout (see page XX) plus any key remaps
and or macros that you have previously saved to this layout.
Note: No change to Thumb Key Mode or other settings.
Activate Mac Thumb Key Mode Program + F5
Activates Mac Thumb Key Mode (see page XX).
Note: No change to the Layout or other basic settings.
Activate PC Thumb Key Mode Program + F6
Activates PC Thumb Key Mode (see page XX).
Note: No change to the Layout or other basic settings.
To Next Page
Loading...
Need help?
General