Cartridge Changes and Sanitization
If you choose to change the cartridges on your Kinetico K5 Drinking Water
Station yourself, you must use a sanitization kit available from your Kinetico
dealer. Follow these instructions to fully sanitize your system. Wash your hands
thoroughly and do not touch any internal portions of the system. Or call your
local, authorized Kinetico dealer who can change the necessary filters, disinfect
your system and analyze your water to be sure it is of the best quality.
NOTE: Although great care is taken to provide a sanitized drinking water unit,
possible contamination can result from vendor products, assembly,
packaging, shipping or extended storage time. Proper sanitization
is required.
IMPORTANT: do not drink water from system during sanitization.
WARNING: To avoid possible injury and property damage, this system must be
properly depressurized before attempting to remove any cartridge or
other component.
WARNING: After completing the sanitization procedure, the tank must be
filled and drained twice before water can be consumed.
11
To Next Page
Loading...
Need help?
General
