Kinetico Kube - Living With Your Kube; Water Flow Considerations; Using the By-Pass Knob; Routine Checks

10
Kube Drinking Water Filter
Installation Instructions
Visit: kubewater.co.uk
Pantone 1235 Pantone 185 Pantone Process Blue Pantone 360 Pantone Cool Grey 10
STEP 8
Connect the water supply
Push the cut length of tubing all the way into
the adaptor fitted to the saddle valve. Pull
back to check it is secure.
STEP 6
Secure the filter head
Attach the filter head to the side of your kitchen
cupboard, ensuring there is a minimum of 35cm
clearance below the filter head to allow for easy
removal and replacement of the filter cartridge.
STEP 7
Cut the tubing
Measure the length of tubing required from the
saddle valve to the left hand connection on the
filter head, allowing for a bit of slack.
Taking care not to kink the tubing, use a sharp
utility knife to make a perpendicular cut at the
correct length.
1.55
35cm