Kinetico Kube - Is it Time for a Filter Change?; Filter Life Monitoring; Filter Replacement Procedure

11
Pantone 1235 Pantone 185 Pantone Process Blue Pantone 360 Pantone Cool Grey 10
Kube Drinking Water Filter
Installation Instructions
Visit: kubewater.co.uk
STEP 9
Connect to inlet fitting
on filter head
Push the other end of the tubing into the
inlet fitting on the filter head. Push it all the
way in and pull back to check it is secure.
STEP 10
Cut the outlet tubing
Measure the length of tubing required from
the right hand (outlet) connection on the
filter head, to where the tap will be installed,
allowing for a bit of slack. Taking care not to
kink the tubing, use a sharp utility knife to
make a perpendicular cut at the correct length.
STEP 12
Install the tap
It is now time to install the tap, please follow
the instructions on the next appropriate page.
STEP 11
Connect to outlet fitting
on filter head
Push the other end of the tubing into the
inlet fitting on the filter head. Push it all the
way in and pull back to check it is secure.