TOOLS REQUIRED:
SCREWDRIVER, TORQUE WRENCH or ADJUSTABLE WRENCH, LEAK TESTING SOLUTION
1. Before assembling, check that all cooker components are included in the shipping carton.
Identify these cooker parts from the assembly drawing. Accessories such as pots may vary
according to model. Check the list of accessories on your cooker box. The following parts are
considered essential and should be included in your package regardless of model number.
Required Parts Lists:
Cooker Stand, Cast Burner, LP Hose and Regulator, Thermometer
If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the
hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your cooker.
3. After reviewing assembly instructions, go to the Use and Care section of this manual for further
instructions.
9
SECTION I
OUTDOOR COOKER ASSEMBLY
THE USE AND CARE MANUAL MUST BE READ AND UNDERSTOOD
BEFORE USING THE APPLIANCE
Throughout this manual the words appliance, cooker, fryer/boiler, burner and stove will be
used interchangeably to refer to the King Kooker® Outdoor Cooker.
To Next Page
Loading...
Need help?
General
