6.5 Backlight ON/OFF
Hold both UP and MODE for 3 seconds , switch on the
J LCD backlight. When the surrounding light is not
enough or it is in the evening, you can turn on the
backlight. Hold both UP and MODE for 3 seconds again
and you can turn off the backlight.
When the backlight power ON, the headlight also power
on (if the bike assembled with a headlight).
6.6 Distance Display (Riding Distance/Total Distance)
Press MODE for single trip and accumulate trip. This
function is convenient for users to check the riding
distance (TRIP) and the total distance (ODO).
Range Interface
To Next Page
Loading...
Need help?
General
