EasyManua.ls Logo

King-Meter JK-LCD User Manual

King-Meter JK-LCD
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
KING-METER
USERS GUIDE
JK
-
LCD
Question and Answer IconNeed help?

Do you have a question about the King-Meter JK-LCD and is the answer not in the manual?

King-Meter JK-LCD Specifications

General IconGeneral
TypeLCD Display
Voltage24V/36V/48V
Handlebar Size22.2mm
Water ResistanceIP65
FunctionsSpeed, Battery Level, Distance, PAS Level, Error Codes
Connector Type5-pin connector

Summary

Preface

Appearance and Dimensions

JK-LCD Housing Material and Temperature Range

Describes the housing material (PC plastic) and its operating temperature range.

Display Content

Precautions

Installation

Operation

Power On/Off

How to turn the display and controller on or off.

Speed Mode Selection

How to cycle through different speed display modes.

Distance Modes

How to view and reset trip, ODO, and trip time.

Headlight Toggle

Instructions for turning the headlight on or off.

6km/h Push Assistance

How to activate the 6km/h push assistance mode.

PAS Level Adjustment

How to adjust the Pedal Assist System (PAS) level from 1 to 5.

Battery and Power Display

Explains the battery indicator and power usage display.

Error Code Troubleshooting

Lists error codes, their meanings, and solutions.

Setting

Wheel Size Configuration

How to set the wheel diameter for accurate speed readings.

Speed Limit Configuration

How to set the maximum speed limit for the motor.

Backlight Brightness Adjustment

How to adjust the display backlight brightness.

Unit Settings

How to change display units between Miles/MPH and Kilometers/km/h.

Wire Sequences

About the Product Code

FAQ

Warranty and Coverage

Version

Related product manuals