- 4 -
6. Installation
Fix the display and N3-button unit on the handlebar and
adjust to an appropriate visual angle. Ensuring the power is
off, match display connector with controller connector.
7. Operation
7.1 Power On/Off
Press and hold P for several seconds to toggle the power on
or off to both the display and controller. While the power is off,
the display will no longer consume power with a leakage
current is less than 1uA.
The bike will be shut down automatically if it is
left idle for 10 minutes.
7.2 Selecting Speed Mode (Current/Average/Max)
On turning on the display the default speed mode is
current speed. Pressing and holding M for 3 seconds will
To Next Page
Loading...
Need help?
General
