② Please clean the position to ensure the adhesive quality before installing the rear
camera.
③ Please clean the rear windshield regularly to ensure the image quality if you
choose to install the rear camera on the rear windshield.
④ If you choose to install it near the license plate, you can use adhesive stickers or
screws for fixing.
⑤ Please use the original extension cable and rear camera. If you replace the rear
camera with product of other brands, the effect may be affected and the machine
may be damaged.
⑥ Check the interface, the connecting wire and the rear camera interface and make
sure they are plugged in tightly.
⑦ Please plug the rear camera interface when the camera is
turned off. Do not frequently hot plug the interface, which
may cause damage to the camera. For details, please refer
to the following :
https://www.youtube.com/watch?v=CZYaV5Dh4ok.
Note:
① When connecting the rear camera with the extension cable, please refer to the
details below.
01 02 03 04 05 06
07 08 09 10 11 12 13
14 15
16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 32 33
To Next Page
Loading...
