13.4 Install the rear camera.
Position 1: Install the rear camera on the rear windshield. The installation is easier
when using this method. The power cables are routed as follows:
Position 2: It is recommended to install the rear camera near the license plate. In
this way, the image is crisp and clear for both rear viewing and reversing guide. The
power cables are routed as follows:
To use the reversing function, please install the rear camera near the license plate,
then connect the red wire of the rear camera extension cable to the positive lead
of the vehicle reversing lamp.
Reversing light
Reversing light positive pole
Rear camera connector
Rear camera
01 02 03 04 05 06
07 08 09 10 11 12 13
14
15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 32 33
To Next Page
Loading...
