Kingtex CT Series User Manual

6-3. CT9711 穿線 Threading for CT9711
要得到最佳的縫製效果，縫線的收放量是一個重要的環節，縫製過程裡斷線、跳針、線跡不穩定
等不良現象，錯誤的穿線是其中一個原因，請依照穿線圖正確的穿線。ABC為擊針線，Ｄ為上裝
Threading should be made correctly, please refer referring to the illustration, improper threading might caused
skip stitch, thread breakage and uneven tension.
A,B,C．．． needle thread, D．．． top cover thread, E．．． looper thread, three needle machine is shown
in the illustration below. For two needle machine, threading is the same except two needle thread.
When using cotton tread or nylon thread, the threading is different from other kinds of threads, please refer to the
diagram below.
飾線，Ｅ為下勾線，當下勾針線使用棉線或伸縮尼龍線時，其穿線方法有所不同，如圖所示。
C
B
E
D
A
E
D
C
B
A
When woolly thread used.
用在伸縮尼龍線
A
C
B

Kingtex CT Series Specifications

General

Brand	Kingtex
Model	CT Series
Category	Sewing Machine
Language	English