Kingtex NT67 User Manual

14
5-4 縫線張力控制
依照裁片的特性，縫線的類別，線跡的寬度，
縫目的大小，各種不同的縫製需要來調整，
各條縫線的張力。
旋鈕向右(順時針)張力加大
旋鈕向左(逆時針)張力減小
5-4 Thread tension
Adjust the thread tension with the tension
adjusting nuts -  depending on fabric
type, thread type, seam width,stitch length,
and other sewing conditions.
 To tighten the thread tension, turn the
nuts clockwise.
 To loosen the thread tension, turn the nuts
counterclockwise.
6. 壓腳
6-1 壓腳壓力
在穩定的縫製作業之下，壓腳的壓力愈輕愈好，
放鬆固定螺帽
旋鈕向右(順時針)壓力加大
旋鈕向左(逆時針)壓力減小
調整後再確認鎖緊固定螺帽
6. Presser foot
6-1 Pressure of presser foot
Keep the pressure as low as possible for
stable stitches.
Loosen the lock nut and turn the adjusting
screw to adjust the pressure.
 To increase the pressure, turn the adjusting
screw clockwise.
 To decrease the pressure, turn the adjusting
screw counterclockwise.

Kingtex NT67 Specifications

General

Brand	Kingtex
Model	NT67
Category	Sewing Machine
Language	English