Kingtex NT67 - Adjusting Looper Thread Tension - Eyelet Position; Position of Looper Thread Take-up Eyelet

23
12-3 設定導線孔位置
導線孔、推向最右側，如右圖標準位置。
向 L 方向移動增加揚線量
向 S 方向移動減少揚線量
12-3 Position of looper thread take-up
eyelet:
Set the looper thread take-up eyelets and 
at the extreme right as standard. To increase the
looper thread take-up amount, move them in the
direction “L”.
 To decrease the looper thread take-up amount,
move them in the direction “S”.