Issue: 04/2011
Nowadays cold mirrors are mostly used. Because of their coating, heat can diffuse the
mirror – the lm gate gets a less range of heat but the full range of light.
The following mirrors are available:
» Xenon unit 1,000 W to 2,000 W, Ø 300 mm
» Xenon unit 2,000 W to 7,000 W, Ø 340 mm
Do not touch the inside of the mirror with bare hands. If necessary carefully remove
ngerprints with an alcohol-soaked cloth.
X
Z The mirror should only be changed by trained service personnel.
Z The reector should only be changed and adjusted roughly by the projectionist in
case of need, therefore see chapter 6.4.18.
To Next Page
Loading...
