Issue: 04/2011
The projector can be equipped with the different automation systems.
» If the FP 50 D is running with the
EMK 1 automation system the
projector is equipped with 1 sensor
to read the cue foils.
» If the FP 50 D is running with the
DMP 1 automation system the
projector is equipped with 1 sensor
to read the cue foils.
» If the FP 50 D is running with the
CCA 3 automation system the
projector is equipped with 3 sen-
sors to read the cue foils.
» If the FP 50 D is running with the
SA 2 automation system the pro-
jector is equipped with 2 sensors
to read the cue foils.
X
See the corresponding operating manual for more information.
To Next Page
