M55O114a
7. If the tractor must be lifted for
servicing, take it to a suitably
equipped workshop.
8. Carry out the following operations
before any operation of the tractor:
Engage the four-wheel drive, the
first gear and the parking brake
and put c hocks to the wheels
touching the ground.
9. Before lifting the tractor, prevent it
from swinging by means of wooden
wedges applied to the front axle.
10. Use oor jack of suitable capac-
ity and apply them at the centre
of the front and rear axles while
paying due attention to weight
distribution.
11. No decals for the lifting point are
applied on the tractor, as they
would be, too difcult to apply in
the available spaces and would
be all too easily removed or ef-
faced during normal operation of
the tractor.
M55O115a
Apply the jack lift to the lifting
points according to the type of
operation and follow the safety
procedures given before.
•
NOTE
To Next Page
Loading...
