1. To drain the used oil, remove the
rightandleftdrainpugsandlling
plug at the front axle case and drain
the oil completely from the oil pan.
2. After draining, reinstall the drain
plug.
3. Fill with new oil up to the proper level
of the sight glass.
4.Afterlling,reinstallthellingplug.
(1) Sight Glass (2) Filling Plug
(3) Drain Plug
CHANGING FRONT AXLE CASE OIL
S76Oa18a
Coolant Capacity
48 L (12.7
U.S.gals.)
Coolant Capacity
7.0 L (1.85 U.S.gals.)
To avoid personal injury:
Allow engine to cool down suf-
ciently, oil can be hot and can
burn.
•
CAUTION
4. After running the engine for a few
minutes, stop it and check the oil
level again; add oil to prescribed
level.
5.Replace theoillterat same time
when the transmission replace.