A ROPS should never be modied by
welding, grinding or cutting, as this
can weaken the ROPS structure. If
any components of the ROPS unit is
damaged, it must be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be tted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with narrow
tread widths. For added stability
you should adjust your rear wheel
tread width, see page 8-4.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and parking
brake is applied.
20. For your safety
ROPS with a seat
belt is recommended for all ap-
plications.
(1) Tread
S76O106a S76O107a
Always use seat belt when the
tractor is equipped with a ROPS.
Never use the seat belt when trac-
tor is not equipped with a ROPS.
(ROPS: Roll-Over Protective
Structures)
•
NOTE
To Next Page
Loading...
Need help?
General
