3.7 Fuel switch and fuel filter cleaning
Fuel tank
Sealing gasket
Filter core or element
Fuel switch
■ Keep smoking materials and any open flames away during fuel system maintenance.
■ Make sure that there is no leaking fuel after service.
（1）Drain the fuel from the tank then remove the fuel tank.
（2）Loosen the connection nut between fuel switch and tank and remove the filter core.
（3）Open the fuel switch to start cleaning and dry it with compressed air.
（4）Remove any clogged foreign material from the fuel filter core and check the fuel filter for damage.
（5）Install the sealing gasket, filter core, and fasten the connection nut between fuel switch and oil tank.
To Next Page
Loading...
