2. SERVICE and MAINTENANCE
2.1 The importance of proper servicing
Proper servicing is essential to the safety of the operator and the reliability of the generator. Any error
or oversight made by the technician while servicing can easily result in faulty operation and/or damage to
the equipment or injury to the operator.
Improper servicing can cause an unsafe condition that can lead to serious injury or death.
Follow the procedures and precautions in this shop manual carefully.
Some of the most important precautions are stated below. But we could not list all the potential danger,
you should judge yourself if it need to do the maintenance task.
Could not follow the maintenance instruction and safety precautions can cause an unsafe condition that
can lead to serious injury or death. Follow the procedures and precautions in this shop manual carefully.
2.2 Safety Precautions
Be sure you have a clear understanding of all basic shop safety practices and that you are wearing
appropriate clothing and safety equipment. When performing maintenance or repairs, be especially
careful of the following:
• Read the instructions before you begin, and be sure you have the tools and skills required to
perform the tasks safely.
• Be sure that the engine is off before you begin any maintenance or repairs. This will reduce the
possibility of several hazards:
- Carbon monoxide poisoning from engine exhaust.
- Run engine in the ventilated place whenever.
- Burns from hot parts.
-Touch the engine parts after it cooled.
- Injury from moving parts.
• Do not run the engine unless the instructions tell you to do so. Keep your hands
and clothing away from rotating parts.
• To reduce the possibility of fire or explosion, exercise extreme caution when
working around gasoline. Use only a nonflammable solvent, not gasoline, to clean
parts. Keep cigarettes, sparks and flames away from all fuel-related parts.
To Next Page
Loading...
Need help?
General
