5 6
To remove the battery pack, push the battery latch
upwards, and then remove the battery away from the
radio.
Note:
•
battery in fire.
• Do not disassemble the battery casing by yourself.
Do not short-circuit the battery terminals or dispose
2.3 Installing the Antenna
2.4 Installing the External Speaker/MIC
Open the cover for external speaker/MIC jacks, and
then insert the external speaker/MIC plug into the
jacks on the radio.
Note: When using the external speaker/MIC, the
radio will not be waterproof.
Hold the base of the antenna and turn the antenna
clockwise into the connector on the top of the radio
until secure.
MIC
M
IC
2.5 Installing/Removing the Belt Clip
Align the grooves of the belt clip with those on the
rear of the battery. Then press the belt clip
downwards until a click is heard. To remove the belt
clip, use your fingernail or a tool to press the belt clip
tab away from the battery. Then slide the belt clip
upwards to remove it.
Belt Clip Tab