4.3 Putting the unit back into operation
Before recommissioning, clean and disinfect the unit
Ä
Chapter 8
‘Cleaning and disinfection’ on page 55.
1. Plug in power plug.
2. Insert unit key in key switch.
3. Turn unit key to position “1”.
ð
The Display shows the interior temperature.
4. Check target temperature and adjust it, if necessary
Ä
Chapter 6.2.1.2 ‘Displaying and changing the target tem-
perature’ on page 38.
Lead time of the temperature alarm!
The temperature alarm is active at the earliest when
the target temperature is reached, and at the latest
after two hours of unit operation.
5. When the unit has reached its target temperature, place the
chilled goods in the unit.
Putting the unit back into operation
Transport and decommissioning
Putting the unit back into operation
23.05.2023Refrigerator/freezer MED series34
To Next Page
Loading...
