7 Operation
Personnel:
n
User
7.1 Switching on the unit
1. Insert the key into the key switch.
2. Turn unit key to position “1”.
ð
The Display shows the interior temperature.
3. Remove the key and store it so it is protected against unau-
thorised access.
4.
Check target temperature and adjust if necessary
Ä
Chapter
6.2.1.2 ‘Displaying and changing the target temperature’
on page 38.
Lead time of the temperature alarm!
The temperature alarm is active at the earliest
when the target temperature is reached, and at
the latest after two hours of unit operation.
5. Stock the unit when the target temperature is reached.
The door is stiff when it is first opened
Cooling creates a vacuum in the interior, so you
may require additional force when opening the
door for the first time.
7.2 Switching off the unit
1. Insert unit key in key switch.
2. Turn unit key to position “0”.
ð
The unit switches to standby mode and the Display
shows .
Only switch the stocked unit off for short periods!
To protect the chilled goods, only switch the stocked
unit off for short periods.
To shut down the unit for a longer period, proceed as
described in
Ä
Chapter 4.2 ‘Final decommissioning of
the unit’ on page 33.
Operation
Switching off the unit
23.05.2023 Refrigerator/freezer MED series 43
To Next Page
Loading...
