6.2.1 Target temperature
6.2.1.1 Function of the target temperature
The target temperature specifies the temperature at which the unit
is operated to store the chilled goods in optimal conditions.
The target temperature of the unit is preset by KIRSCH.
Changes to the target value do not change the temper-
ature warning limits. These are adjusted manually
Ä
Chapter 6.2.1.2 ‘Displaying and changing the target
temperature’ on page 38.
6.2.1.2 Displaying and changing the target temperature
Press button [Target temperature].
ð
The current target temperature is displayed.
1. Insert unit key in key switch.
NOTICE!
Danger due to faulty programming!
By putting the key in key position “P” it is possible to
access the programming functions of the unit. Program-
ming that is unsuitable for the chilled goods can cause
damage to the chilled goods.
– Have programming performed by qualified
employees.
– Once programming is complete, turn the key switch
to position “1” and remove the key.
– Secure the key against unauthorised access.
– Do not operate the unit in key position “P”.
2. Turn unit key to position “P”.
3. Press and hold button [Target temperature].
4. Use button [Min.] or [Max.] to set the required target value.
Changes must be performed by
qualified employees
Displaying the target temperature
Changing the target temperature
Commissioning
Programming the unit > Target temperature
23.05.2023Refrigerator/freezer MED series38
To Next Page
Loading...
