Kirsch MED 100 PRO-ACTIVE

Need help?

Do you have a question about the Kirsch MED 100 PRO-ACTIVE and is the answer not in the manual?

Summary

1 Product description

1.2 Display and control elements

Explains the design, function of key switch, and buttons on the control unit.

1.5 Unit functions

Describes cooling, SuperFrost, defrosting, temperature display, memory, monitoring, and sensors.

3 Safety

3.1 Symbols in this instruction manual

3.2 Purpose

3.3 Foreseeable misuse

3.4 Residual risks

Details risks like infection, escaping refrigerant, and hot surfaces.

3.6 Safety markings

3.7 Staff qualification

3.8 Personal protective equipment

4 Transport and decommissioning

4.1 Unit transport

Covers safety instructions for transporting the unit, including risks of crushing and refrigerant.

4.2 Final decommissioning of the unit

4.3 Putting the unit back into operation

Details the process for recommissioning the unit after transport or shutdown.

5 Set-up, installation and connection

5.1 Setting up the unit

Specifies conditions for setting up the unit, including location and ventilation.

5.2 Installing the unit

5.3 Connecting the unit

Explains how to connect the unit to the power supply.

6 Commissioning

6.1 Activities during commissioning

Outlines the sequence of activities for commissioning the unit.

6.2 Programming the unit

Details the process of programming the unit, emphasizing authorized personnel.

6.2.1 Target temperature

Explains the function and setting of the target temperature.

6.2.2 Temperature warning limits

Defines temperature warning limits and their function.

6.2.3 Adjusting the humidity

7 Operation

7.1 Switching on the unit

Step-by-step guide to powering on the refrigerator.

7.2 Switching off the unit

Instructions for safely switching off the unit to standby mode.

7.3 Retrieving;erasing the temperature memory

7.4 Switching on the SuperFrost function

7.5 Data reading-out on the unit with PC-KIT-STICK

Instructions for exporting data to a USB stick.

7.6 Setting up PC-KIT-NET (optional)

7.7 Stocking the unit

Provides guidelines for safely stocking the unit with chilled goods.

8 Cleaning and disinfection

Cleaning and disinfecting the unit

9 Maintenance

9.1 Safety inspection

Testing the temperature alarm

10 Alarms

10.1 Alarm functions

10.2 Handling alarms

11 Status displays and error messages

11.1 Status displays

11.2 Error messages

Describes how to interpret and respond to unit and software errors.

12 Decommissioning and disposal

12.1 Decommissioning unit

12.2 Disposing of the unit