NOTICE!
Danger to chilled goods due to defective or faulty
unit!
A defect or fault in the unit means that its cooling per-
formance is no longer ensured. Reduced cooling per-
formance can cause considerable damage to chilled
goods.
– Select an alternative storage location for the chilled
goods.
– Ensure operating and storage conditions.
– Transfer chilled goods to new location.
Error messages indicate a malfunction of the unit.
Error messages and the temperature display alternate on the dis-
play.
If there is more than one error, the errors are shown one after the
other on the display.
In addition to the information on the display, the buzzer sounds to
report the error.
The unit indicates the following errors visually and acoustically:
n Unit errors
n Software errors
When error messages occur, proceed as described below:
1. Deactivate the buzzer.
2.
Evaluate error indicator according to the table (
Ä
Chapter 11
‘Status displays and error messages’ on page 64).
3. Perform the recommended measures.
4. Acknowledge the alarm message.
Transferring chilled goods
Occurrence of error messages
Procedure in case of error mes-
sages
Status displays and error messages
Error messages
23.05.2023 Refrigerator/freezer MED series 65
To Next Page
Loading...
