3.4 Residual risks
WARNING!
Danger of infection due to inadequate hygiene, dis-
infection and sterilisation!
Contact with parts that have not been cleaned, steri-
lised or disinfected poses the danger of infection.
– Comply with the applicable requirements for per-
sonal hygiene, disinfection and sterilisation.
– Clean, disinfect and sterilise the unit before filling it
for the first time.
– Clean, disinfect and sterilise the unit in line with this
instruction manual during operation.
WARNING!
Danger due to escaping refrigerant!
The refrigerant used in the unit is explosive and pres-
surised, and can cause serious injury if it comes into
contact with the eyes or skin.
– During transport and set-up, do not bend or pierce
the tubing and the evaporator.
– Do not damage the surface coat (scratching it off,
for example).
– Wear safety glasses and protective gloves when
handling the refrigerant circuit.
WARNING!
Danger due to hot surface!
The marked areas of the unit can cause severe skin
injuries if touched.
– Do not touch areas of the unit marked in this way.
– These areas are very hot and can still cause burns
several hours after the unit has been switched off.
Infection of the user
Escaping refrigerant
Hot surface
Safety
Residual risksResidual risks
23.05.2023Refrigerator/freezer MED series24