Kirsch MED 100 PRO-ACTIVE - 4.2 Final decommissioning of the unit

Protective equipment:
n
Safety shoes
n
Protective gloves
Decommission the unit as shown in section Ä ‘Final decommis-
sioning of the unit’ on page 33.
1. Transport the unit to the new location.
Waiting time before recommissioning:
Once the unit has been transported, set up the
unit and wait one hour before recommissioning,
so that the refrigerant can distribute itself evenly
throughout the refrigerant circuit again.
2.
Recommission the unit as shown in section Ä ‘Putting the
unit back into operation’ on page 34.
4.2 Final decommissioning of the unit
Insert unit key in key switch.
1. Turn unit key to position “0”.
2. Unplug the power plug.
3. Remove unit key.
4. Leave unit door open to prevent the formation of odours and
mould.
Transporting the unit to a new loca-
tion
Final decommissioning of the unit
Transport and decommissioning
Final decommissioning of the unit
23.05.2023 Refrigerator/freezer MED series 33