12
PRODUCT ASSEMBLY
*Included with select models only. Also available as an optional accessory.
OPERATING THE SPEED CONTROL
NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Plug Stand Mixer into proper electrical
outlet. Always set Speed Control Lever
on lowest speed to start, then gradually
increase speed to avoid splashing
ingredients. See “Speed Control Guide”
chart.
1
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Do not scrape bowl while Stand Mixer is
operating. The bowl and Beater are designed
to provide thorough mixing without frequent
scraping. Scraping the bowl once or twice
during mixing is usually sufficient.
2
W11658773A.indb 12W11658773A.indb 12 4/13/2023 4:56:09 PM4/13/2023 4:56:09 PM
To Next Page
Loading...
