KitchenAid 5K45 - PRODUCT ASSEMBLY: BOWL AND MOTOR HEAD; ATTACHING;REMOVING THE BOWL; LIFTING;LOWERING THE MOTOR HEAD

8
To lower Motor Head: Push the Locking
Lever to unlock and gently bring the
head down. The Locking Lever will
automatically go back in the lock position
when the head is down. Before mixing,
test lock by attempting to raise Motor
Head.
2
ATTACHING/REMOVING THE BOWL
PRODUCT ASSEMBLY
LIFTING/LOWERING THE MOTOR HEAD
NOTE: Motor Head should always be in locked position when using the Stand Mixer.
To lift Motor Head: Push the Locking
Lever to the unlock position and lift
the head. Once lifted, the lever will
automatically go back in the lock position
to keep the head lifted.
1
Place Bowl on Bowl Clamping Plate. Turn
Bowl gently in clockwise direction.
3
Hold the Locking Lever in the unlock
position and tilt Motor Head back.
2
To remove Bowl: Repeat steps 1 and 2.
Turn Bowl gently counterclockwise.
4
To attach Bowl: Turn Speed Control
Lever to off (O). Unplug Stand Mixer.
1
W11658773A.indb 8W11658773A.indb 8 4/13/2023 4:56:08 PM4/13/2023 4:56:08 PM