KitchenAid 5K45 - TROUBLESHOOTING

16
TROUBLESHOOTING
PROBLEM SOLUTION
If Stand Mixer warms up
during use
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit.
This is normal.
The Stand Mixer emits a
pungent odour
This is common with electric motors, especially when new.
If the Flat Beater hits the Bowl
Stop the Stand Mixer. See the “Beater to Bowl Clearance”
section and adjust the beater to bowl clearance.
If your Stand Mixer should fail
to operate, please check the
following
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it back
on. If the Stand Mixer still does not start, allow it to cool for
30 minutes before turning it back on.
If the problem cannot be
corrected
See the “Terms of KitchenAid Guarantee (“Guarantee”)”
section. Do not return the Stand Mixer to the retailer;
retailers do not provide service.
WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
W11658773A.indb 16W11658773A.indb 16 4/13/2023 4:56:10 PM4/13/2023 4:56:10 PM