KitchenAid 5K45 - PRODUCT ASSEMBLY: ATTACHMENTS; ATTACHING;REMOVING MIXER ATTACHMENTS

ENGLISH
9
PRODUCT ASSEMBLY
To attach accessory: Turn Speed Control
Lever to off (O). Unplug Stand Mixer.
1
To remove accessory: Repeat steps 1
and 2. Press accessory upward as far as
possible and turn to the counterclockwise.
Then pull accessory from the Beater Shaft.
4
Hold the Locking Lever in the unlock
position and tilt Motor Head back.
2
Slip accessory onto Beater Shaft and
press upward as far as possible. Then,
turn accessory to the clockwise, hooking
accessory over the pin on the shaft.
3
*Included with select models only. Also available as an optional accessory.
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
W11658773A.indb 9W11658773A.indb 9 4/13/2023 4:56:09 PM4/13/2023 4:56:09 PM