KitchenAid 5K45 - CARE AND CLEANING; CLEANING THE STAND MIXER AND PARTS

ENGLISH
15
*Included with select models only. Also available as an optional accessory.
CARE AND CLEANING
Always be sure to unplug Stand Mixer
before cleaning. Wipe Stand Mixer with a
soft, damp cloth. Do not use
household/commercial cleaners. Wipe
off beater shaft frequently, removing any
residue that may accumulate. Do not
immerse in water.
1
Bowl, Pouring Shield*, white flat beater,
Flex Edge beater*, and white dough hook
may be washed in a dishwasher. Or, clean
them thoroughly in hot sudsy water and
rinse completely before drying.
Do not store beaters on shaft..
2
IMPORTANT: The wire whip is not
dishwasher-safe. Clean it thoroughly in
hot sudsy water and rinse completely
before drying. Do not store wire whip on
shaft.
3
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
IMPORTANT: Allow the appliance to cool completely before putting on or taking off
parts, and before cleaning the appliance.
W11658773A.indb 15W11658773A.indb 15 4/13/2023 4:56:10 PM4/13/2023 4:56:10 PM