9
PRODUCT USAGE
IMPORTANT: After removing the Pasta
Roller or Cutter from the Stand Mixer,
be sure to clean any dried dough. See
“Care and Cleaning” for details.
DISASSEMBLING THE PASTA ROLLER AND CUTTERS
1
Turn the Stand Mixer OFF (0) and
unplug.
2
Remove the Pasta Roller or Cutter
from the Stand Mixer.
OPTIONAL: If desired, attach the
next Pasta Roller or Cutter, using the
directions in the “Attaching the Pasta
Roller and Cutters” section.
3
After finishing with the Pasta Roller
and Cutters, replace the hub cover
and tighten the attachment knob
on the Stand Mixer.
W11499080A.indb 9W11499080A.indb 9 12/23/2020 5:07:38 PM12/23/2020 5:07:38 PM
To Next Page
Loading...
