7
Press (Time) and use the dial to set
the desired cooking time.
Pulse
˚C
˚F
H M S
Quick Stir
8
Press (Start). The temperature and
time will stop flashing and the time will
begin counting down. PREHEATING
will appear in the display until the set
temperature is reached.
9
When the timer reaches 00:00, a tone
will sound and the Cook Processor will
turn off.
Using oven mitts or pot holders, release
the locking lever, then unlatch and open
the lid. Remove any accessory before
removing the bowl and serving.
Do not eat food from the cook
processor if “KitchenAid Press
Any key to Continue” shows
in the display.
Doing so can result in food
poisoning or sickness.
In the event of a power outage, the
welcome screen will be displayed when
power is restored.
If a cooking cycle was interrupted, be
sure that food is cooked completely, to a
minimum internal temperature of at least
74°C (165°F).
10
Turn the main power switch
to O (OFF).
IMPORTANT: To avoid splashing, always turn motor off before unlatching the lid.
NOTE: If the Cook Processor is at a higher
temperature, and a lower temperature is
selected, COOLING will appear in the display
until the lower temperature is reached.