31
CARE AND CLEANING
COOKTOP CONTROLS
Pull the knobs straight away from the control panel to remove.
Know Your Cooktop Controls
■ To avoid damage to the cooktop controls, do not use steel
wool, abrasive cleansers, or oven cleaner.
■ To avoid damage, do not soak knobs.
■ When replacing knobs, make sure knobs are in the OFF
position.
■ Do not remove seals under knobs.
■ When replacing knobs after cleaning either the surface
burner controls or the griddle module control, make sure
the knobs are replaced to the correct location. The power
burner knobs have power settings, and the griddle knob
has temperature settings. All other knobs have Hi, Med, Lo
settings only.
STAINLESS STEEL
(ON SOME MODELS)
Use affresh
®
Stainless Steel Cleaner or affresh
®
Stainless Steel
Cleaning Wipes (not included). Rub in direction of grain to avoid
possible damage to the steel surface.
Do not use:
■ Soap-filled scouring pads
■ Abrasive cleaners
■ Cooktop polishing creme
■ Steel-wool pads
■ Gritty washcloths
■ Abrasive paper towels
1.
Remove knobs.
2.
Clean with warm, soapy water.
Use cleaner or wipes.
CONTROL PANEL
Locking buttons avoids touch screen activation during cleaning.
Apply glass cleaner to soft cloth or sponge – not directly on panel,
or use affresh
®
Kitchen and Appliance Cleaner (not included).
Do not use:
■ Abrasive cleaners
■ Steel-wool pads
■ Gritty washcloths
■ Abrasive paper towels
■ When replacing knobs after cleaning either the surface
burner controls or the griddle module control, make sure
the knobs are replaced to the correct location. The power
burner knobs have power settings, and the griddle knob
has temperature settings. All other knobs have Hi, Med, Lo
settings only.
DOOR EXTERIOR
Apply glass cleaner to soft cloth or sponge – not directly on panel,
or use affresh
®
Kitchen and Appliance Cleaner (not included).
1.
Activate the lock buttons. Touch and hold START until
“controls locked” appears in the display and a confirmation
tone sounds.
2.
Apply cleaner.
Apply cleaner.
To Next Page
Loading...
