EasyManua.ls Logo

KitchenAid KUD Series - User Manual

KitchenAid KUD Series
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TECHNICAL EDUCATION
JOB AID 4317364
KAD-9
DRAWER
DISHWASHER

Questions and Answers

  • C
    Christina FrazierAug 4, 2025
    Why my KitchenAid KUD will not run on power up?
    • J
      Julia EdwardsAug 4, 2025
      If your KitchenAid Dishwasher won't run, there might be a few reasons. First, check the fuses, circuit breakers, and junction box connections to ensure the unit is getting power. Other potential issues include motor failure, power to only one tub, a hall sensor out of position or with a bad connection, loose connections, a faulty EMI filter or chassis PCB, or a failed hall sensor. For loose or bad connections, faulty EMI filter, hall sensor out of position or failure, or faulty chassis PCB, unplug the dishwasher or disconnect the power before checking or replacing any parts.
  • S
    Stephanie CunninghamAug 25, 2025
    How to fix electronics failure (EEPROM access error) in KitchenAid KUD?
    • K
      Karen CookAug 25, 2025
      If you're experiencing an electronics failure with an EEPROM access error on your KitchenAid Dishwasher, it might not operate. To resolve this, try unplugging the dishwasher or disconnecting the power for 10 seconds, then plug it back in or reconnect the power. This should clear the error code. If the error code persists, the electronic controller may need to be replaced.
  • D
    Dr. Nicholas TaylorNov 14, 2025
    Why KitchenAid KUD Dishwasher senses water temperature greater than 185°F (85°C)?
    • S
      sandra57Nov 14, 2025
      If your KitchenAid Dishwasher senses a water temperature greater than 185°F (85°C), it could be due to several reasons: * The inlet water is too hot, exceeding 185°F (85°C). If this is the case, adjust your water heater setting. * The heater element is continuously on. Unplug the dishwasher or disconnect power and replace the electronic controller. * The inlet valve has failed. Unplug the dishwasher or disconnect power and check the resistance of the inlet valve coil, replacing it if necessary. Other potential causes include low water pressure (must be above 4.3 psi), a spray arm not in place, an obstructed inlet hose or valve, bad wiring or connections, siphoning, a slipping impeller, moisture around the temperature sensor, or a failed temperature sensor. Check drain hose install...

Summary

Introduction, Safety, and Specifications

Forward and Goals

Provides an introduction, purpose, and learning objectives for the service manual.

Safety First

Emphasizes the importance of reading and obeying all safety messages for user and others.

Model & Serial Number Information

Explains model designations and where to find serial number labels and tech sheets.

Specifications

Lists the technical specifications including electrical, general, dimensions, and cavity.

Warranty Information

Details the terms and conditions of the dishwasher's limited warranty.

Installation Procedures

General Installation Requirements

Provides general guidelines, dimensions, and electrical requirements for dishwasher installation.

Installing the Dishwasher

Step-by-step guide for physically installing the dishwasher into the cabinet opening.

Front Panels and Toe Kick

Instructions for installing standard and custom front panels and toe kicks.

Product Operation

System Overview and Features

Provides a general description of the dishwasher's main components, features, and systems.

Using the Dishwasher

Guides on operating the dishwasher, including detergent and rinse aid usage, and performance tips.

Wash Programs and Cycle Control

Details available wash programs, cycle control operations, and option adjustments.

Component Access, Testing, and Troubleshooting

Component Locations and Removal Procedures

Illustrates component locations and provides procedures for removing major internal parts.

Component Testing Procedures

Details resistance testing procedures for key components like motors, sensors, and valves.

Diagnostics and Troubleshooting Guide

Covers error codes, diagnostic modes, and troubleshooting common problems.

Wiring Diagram and Support

Wiring Diagram

Illustrates the electrical connections between components for service reference.

Support and Contact Information

Provides contact information for product specifications, warranty, and technical assistance.

KitchenAid KUD Series Specifications

General IconGeneral
TypeBuilt-In
Soil SensorYes
Control TypeElectronic
Number of Wash Cycles5
Energy Star CertifiedYes
Wash CyclesNormal, Heavy, Rinse Only
Drying SystemHeated Dry
Decibel RatingVaries by model (typically 46-51 dBA)
Place SettingsVaries by model (typically 12-14)
Stainless Steel TubYes (on some models)

Related product manuals