— 3 —
ALWAYS check the brake before use (Refer to Sec. 5-6)
ALWAYS check for loose or missing parts before use.
ALWAYS lubricate the hoist regularly (Refer to Sec. 6).
ALWAYS use the specified gear oil.
ALWAYS pay attention to the load at all times when operating the hoist.
ALWAYS ease the slack out of the chain and sling when starting a lift to prevent a
sudden loading.
ALWAYS use a hoist only between the allowable ambient temperature from -20°C
(-4°F) and to + 40°C (+104°F).
ALWAYS secure a hoist and loads properly after use.
ALWAYS consult the manufacturer or your dealer if you plan to use a hoist in a
dusty, moist or greasy environment.
ALWAYS consult the manufacturer or your dealer if you plan to use a hoist in an
excessively corrosive environment. (Saltwater, sea air and/or acid or
other corrosive compounds)
ALWAYS make sure that all persons stay clear of the suspended load.
ALWAYS maintain firm footing when operating hoist.
ALWAYS avoid unnecessary inching of hoist control.
ALWAYS make the hoist motor completely stop before reversing.
ALWAYS ground the electric chain hoist before using.
ALWAYS use a hoist within the rating of the electrical motor.
ALWAYS be familiar with hoist operating controls, procedures and warnings.
ALWAYS make sure the brake functions properly before use.
ALWAYS use the hoist manufacture’s recommended parts when repairing a hoist.
ALWAYS use the end of the trolley side frames to contact the rail-stops.
ALWAYS shut power off from its source and lock out before servicing is
performed.
To Next Page
Loading...
Need help?
General
